1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.
2. Remove facing of a door of a back or trunk lid, address appropriate section.
|
3. Squeeze out 8 clips (arrows on an illustration) slips (2) with registration plate outside. For this purpose put from the inside of a cover on each clip a head of the corresponding diameter and depth and squeeze out a clip.
|
The head presses on a clip thorn, separating it from the holder. |
|
4. Turn off a nut from the screw (1) and remove a slip (2) with registration plate from a back door. 5. Disconnect a cable (1) from the locking mechanism (2) (the shooter on an illustration) and disconnect the plug.
|
Depending on a design it is necessary to uncover to have an opportunity to disconnect a cable. |
|
6. Turn out 2 screws (1) and take out the locking mechanism (2) with the lock from a door. |
|