Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car


Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - Leaving and external equipment of a body
      General information and security measures when carrying out body works
      Cleaning and leaving
      Repair of insignificant damages of body panels
      Repair of considerable damages of a body
      Damages of a windshield as a result of hit of stones
      Replacement of brushes of screen wipers
      Removal and installation of a jet of windscreen washer of a windshield
      Removal and installation of a jet of back glass
      Removal and installation of the lever of a screen wiper of a windshield
      Removal and installation of the lever of a back screen wiper
      Removal and installation of a catchment basin
      Removal and installation of a cowl
      Removal and installation of facing of a cowl
      Adjustment of a cowl
      Removal and installation of the lock of a cowl
      Drive cable detachment from the cowl lock
      Removal and installation of a lattice of a spoiler
      Removal and installation of a bumper
      Removal and installation of a rear bumper
      Removal and installation of a forward wing
      Removal and installation of a protective level on a wing
      Removal and installation of a protective level on a bumper
      Removal and installation of a protective level on a door
      Removal and installation of a forward loker covered
      Removal and installation of a back part of a loker of a wing
      Removal and installation of a forward door
      Adjustment of a door
      Removal and installation of forward facing of a door
      Removal and installation of a triangular slip
      Removal and installation of the external handle of a door
      Removal and installation of facing of an external rear-view mirror
      Removal and installation of an external mirror
      Removal and installation of glass of a mirror
      Removal and installation of a trunk lid
      Removal and installation of facing of a trunk lid
      Removal and installation of a clamp of the lock of a luggage carrier
      Removal and installation of the lock of a door of a back
      Removal and installation of the mechanism of the lock of a door of a back
      Removal and installation of the cylinder of the lock of a luggage carrier and door of a back
      Removal and installation of a door of a back
      Adjustment of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of a back spoiler
      Removal and installation of a cap of a cargo compartment
   + Equipment of salon
+ Onboard electric equipment


a45480c7





Removal and installation of a protective level on a bumper

Front bumper

Removal

 PERFORMANCE ORDER

1. Enter a plastic wedge between a protective level (1) and a bumper and take out from a bumper a hook for fastening (2).

The hook for fastening at first is taken out from the car.

2. Take out a protective level by means of a plastic wedge at clamps (3) and remove from a bumper.


Installation

 PERFORMANCE ORDER

1. Apply a protective level to a bumper and enter hooks for fastening.
2. Press a protective level to a bumper and record.


Rear bumper

Removal and installation of a protective level on a rear bumper happens similar to removal and installations of a protective level on a front bumper. At the Sedan models and the sporty coupe the protective level consists of three parts and is fixed on sides by the additional screw. At removal it is necessary to turn out this screw at first.


Removal

 PERFORMANCE ORDER

1. Sedan and sporty coupe: Turn out a bolt (1) in a wheel arch. (2) – tightening nut.

2. Take out from a bumper (3) by means of a plastic wedge a hook for fastening.
3. Release by means of a plastic wedge a protective level (4) at clamps and remove from a bumper.


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal.