Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - Leaving and external equipment of a body
      General information and security measures when carrying out body works
      Cleaning and leaving
      Repair of insignificant damages of body panels
      Repair of considerable damages of a body
      Damages of a windshield as a result of hit of stones
      Replacement of brushes of screen wipers
      Removal and installation of a jet of windscreen washer of a windshield
      Removal and installation of a jet of back glass
      Removal and installation of the lever of a screen wiper of a windshield
      Removal and installation of the lever of a back screen wiper
      Removal and installation of a catchment basin
      Removal and installation of a cowl
      Removal and installation of facing of a cowl
      Adjustment of a cowl
      Removal and installation of the lock of a cowl
      Drive cable detachment from the cowl lock
      Removal and installation of a lattice of a spoiler
      Removal and installation of a bumper
      Removal and installation of a rear bumper
      Removal and installation of a forward wing
      Removal and installation of a protective level on a wing
      Removal and installation of a protective level on a bumper
      Removal and installation of a protective level on a door
      Removal and installation of a forward loker covered
      Removal and installation of a back part of a loker of a wing
      Removal and installation of a forward door
      Adjustment of a door
      Removal and installation of forward facing of a door
      Removal and installation of a triangular slip
      Removal and installation of the external handle of a door
      Removal and installation of facing of an external rear-view mirror
      Removal and installation of an external mirror
      Removal and installation of glass of a mirror
      Removal and installation of a trunk lid
      Removal and installation of facing of a trunk lid
      Removal and installation of a clamp of the lock of a luggage carrier
      Removal and installation of the lock of a door of a back
      Removal and installation of the mechanism of the lock of a door of a back
      Removal and installation of the cylinder of the lock of a luggage carrier and door of a back
      Removal and installation of a door of a back
      Adjustment of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of facing of a door of a back
      Removal and installation of a back spoiler
      Removal and installation of a cap of a cargo compartment
   + Equipment of salon
+ Onboard electric equipment


a45480c7





Removal and installation of a door of a back

Station wagon and sporty coupe

Removal

 PERFORMANCE ORDER

1. Open a back door.
2. Remove facing of a door of a back, address appropriate section.

3. Take out cable conducting (3). Disunite all sockets (1) and disconnect all wires (2) on a door of a back and pull out them through cable conducting (3). On an arrow 2 screws are specified. On an illustration the Station wagon model back door is shown.

4. Disconnect a water hose at a connecting element or a jet of windscreen washer and take out through cable conducting.
5. Sporty coupe: By means of a plastic wedge separate facing in a back part of a roof and pull it a little back. Carefully insert wooden whetstone 65 mm high between a roof and facing.

Before removal of a gas-filled emphasis ask surely the assistant to take a back door. Otherwise the door can fall since it is not kept by one emphasis.


6. Disconnect a gas-filled emphasis from a spherical support on doors of a back and remove it. For this purpose raise an emphasis the screw-driver a little (an arrow on an illustration). The second emphasis is removed similarly.

7. Versatile person: Turn out two bolts of fastening on each loop at the left and on the right (shooters on an illustration).
8. Sporty coupe: Turn off 2 nuts on a loop between a roof and facing.
9. By means of the assistant remove a door of a back and put it on a lining.


Installation

 PERFORMANCE ORDER

1. Put a back door by means of the assistant and screw fastening bolts, without clamping them.
2. Close a door of a back and check gaps, if necessary adjust them.
3. Wrap bolts of a nut of fastening the moment of 9 Nanometers.
4. Establish a gas-filled emphasis on a spherical support and insert a lock ring. Similarly establish the second emphasis.
5. Further installation is carried out in the sequence, the return to removal.