Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
- Routine maintenance
   Specifications
   Indicator of term of approach of planned maintenance (ASSYST)
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
   Replacement of motive oil and oil filter
   Checks of the brake system. Adjustment of the parking brake
   Check of fuel system
   Check of a state and replacement of hoses of a motive compartment, localization of leaks
   Check of a condition of ridge belts of the streaming drive of auxiliary units
   Check of functioning of the cooling system and frost resistance of cooling liquid. Liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil of automatic transmission
   Visual control of a box of gear shifting on oil leak
   Check of a state component of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of level of liquid of system of adjustment of clearance
   Check of the air conditioning system
   Cleaning of the mechanism of the movable panel of the hatch of a roof
   Visual control of a seat belt and block of a safety cushion
   Check of operability of headlights and horn
   Check of a state, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the battery of system of an emergency call of Tele-Aid
   Replacement of an element of the filter of air of salon / coal filter of purification of air
   Check, cleaning and lubricant of the coupling device
   Replacement of brake fluid
   Check of the elastic coupling of the driveshaft
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


a45480c7
У Литві відкрито Музей собак





Check of level of liquid of system of hydrostrengthening of a wheel

 PERFORMANCE ORDER

1. Periodically check liquid level in system of hydrostrengthening of a wheel in order to avoid emergence of problems with management of the car, such as damage of the steering pump. Act as follows.

Do not hold a steering wheel turned against the stop in this or that party more than five seconds. It can put the steering pump out of action.

2. The tank of system of hydrostrengthening of a wheel is located in a motive compartment and has the unscrewing cover with the measuring probe which is built in in it.
3. Park the car on the flat platform and cock the parking brake.
4. Engine 112: Remove the left hose of absorption of air.

5. Turn to the left on 1/4 turns a cover (1) and take out the index of level (2).

6. At cold oil its level has to be between the marks "MIN" and "MAX" (3/4) of the index. Oil is considered cold if its temperature makes about +20 °C.
At warm oil (+80 °C) its level has to be between the marks "MIN" and "MAX" (5/6) of the index.
7. If necessary liquid level in the tank should be added. For addition of level use only new liquid as even the most insignificant impurity can lead to violation of work of hydraulic system.

If liquid level in the tank fell below a zone, the corresponding temperature of liquid, steering with the hydraulic amplifier of the steering mechanism needs to be checked in a specialized workshop as liquid loss takes place. In this case it is not enough to be limited only to addition of level of liquid.

8. Insert a cover with the index and turn.
9. Engine 112: Fix the left hose of absorption of air.
10. At the working engine turn a steering wheel several times from an emphasis against the stop. Thus air will be removed from system.