Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car

Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + The automated box of gear shifting 716.6
   + Automatic transmission 722.6
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Automatic transmission

General information. Removal and installation of the check point

Hydraulic 6-staged Sequentronic check point


1 — the coupling switching off Lever 2 — the transfer recognition Switch 3 — the Main shaft of the check point	4 — the Hydraulic pump 5 — the Tank 6 — the Hydraulic block

The car can be equipped with the automated by the Sequentronic check point or automatic transmission. Provisions of the lever of the selector are transferred in the electric way to the transmission hydraulic system control unit.

The box can be removed without removal of the engine. It is necessary to remove a box at its replacement or repair. It is not recommended to make repairs of a box in house conditions.

Management of transmission is in detail described in the Head the Operation manual.

Procedures of removal and installation are similar to removal and the RKPP installation, the description is provided in the Section Removal and installation of the check point.