Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment


a45480c7





Removal and installation of a back seat

Sedan

Removal

Removal of a back seat at the Station wagon model and the sporty coupe is carried out similarly.


 PERFORMANCE ORDER

1. Release a back seat and cast away it forward.
2. Displace a rug aside and turn off nuts of fastening of a seat belt under a seat.

3. Again cast away a seat back, uncover under a seat and turn off a nut (1) of fastening of a loop.

4. Remove a back seat from a floor and take out it.

5. Turn out a bolt (1) of fastening of a side pillow of a back of a back seat and take out a pillow breakthrough from the holder.

6. Displace a rug aside and turn off a bolt of fastening of a pillow between a back seat and a seatback.
7. Turn out a bolt of fastening of the lock of a seat belt on a car floor.
8. Turn out 2 bolts of fastening of a pin of a loop on the right outside at a wheel arch.
9. Turn out nuts of fastening of a collar on a car floor.
10. Release a seatback and cast away it forward.

11. Turn off other nuts (1) of fastening of a collar of a support (2).

12. Disconnect drafts of release of seatbacks.
13. Take out 1/3 right backs.
14. Remove 2/3 backs from the left pin of a loop.


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal.