Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car

Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
- Automatic transmission
   Specifications
   + The automated box of gear shifting 716.6
   - Automatic transmission 722.6
      Search of malfunctions - the general information
      Problems of the block of electronic control and the operating signals
      Removal and the AT installation with the hydrotransformer
      The AT electrohydraulic control unit (AT is established)
      Dismantling and assembly of the electrohydraulic control unit
      Dismantling and assembly of a plate of gear shifting
      Case of transmission and hydrotransformer
      Multidisk brakes of B2, B3 and gear wheel of blocking at "Parking"
      Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
      Removal and installation of a multidisk brake B1 and oil pump
      Dismantling and assembly of the oil pump
      Dismantling and assembly of a multidisk brake of B1
      Dismantling and assembly of a multidisk brake of B2
      Dismantling and assembly of an output shaft with the central and back block of planetary gear wheels
      Removal and installation of multidisk couplings K1, K2 and K3
      Dismantling and assembly of coupling of K1
      Dismantling and assembly of the leading shaft with coupling by K2 and the forward block of planetary gear wheels
      Dismantling and assembly of coupling of K3
      The blocking mechanism at "parking"
      Removal and installation of the lever of the selector of gear shifting
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

The AT electrohydraulic control unit (AT is established)

AT electrohydraulic control unit


2 — the Transmission 3 — the Pallet 3a — the Connector 3b, 19a — Bolts 4 — the Drain stopper 5 — the Oil filter 19 — the Electrohydraulic control unit	21 — the Directing plug 26 — the 13-contact socket 62 — the Guard and — the Opening under the sensor of frequency of rotation of n3 (Y3/6/2) b — the Opening under the sensor of frequency of rotation of n2 (Y3/6/2)

Removal

PERFORMANCE ORDER

1. Install the gear shifting selector lever in situation "P".
2. Remove a guard (62) and disconnect the 13-contact socket (26).
3. Weaken the directing plug (21) and remove it from transmission.
4. Merge transmission liquid, having turned off a stopper (4).
5. Remove the pallet (3).
6. Remove an oil filter (5).
7. Turn off bolts (19a) and remove the electrohydraulic block (19).

Installation

Installation is taken place in an order, the return to removal.

QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE