Removal and installation of the sensor of daylight
The sensor of daylight is installed on a windshield at height of a rear-view mirror.
Removal
PERFORMANCE ORDER
1. Disconnect a negative cable (-) of the rechargeable battery at the switched-off ignition. It is previously necessary to remove a box of the filter of air of salon.
4. Open by means of the screw-driver clips (arrows on an illustration) and remove the sensor of daylight (3).
The lens of the sensor is pasted on a windshield. The lens has to be replaced only with HUNDRED.
Installation
PERFORMANCE ORDER
1. Insert and fix the sensor. 2. Join the sensor socket. 3. Establish and fix a cover, having pressed it. 4. Attach a cable of mass of the rechargeable battery at the switched-off ignition. Install into place a box of the filter of air of salon. If it is necessary, enter a code of the radio receiver and determine time on hours.