Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   + Angles of installation of wheels of the car
   - Steering and safety cushions
      Steering and safety cushions - general information and security measures
      Security measures during the works with a safety cushion
      Removal and installation of the block of a safety cushion on a steering wheel
      Removal and installation of a steering wheel
      Removal and installation of a tip of steering draft
      Removal and installation of a protective cover of the steering mechanism
+ Body
+ Onboard electric equipment


a45480c7





Removal and installation of a protective cover of the steering mechanism

Removal

 PERFORMANCE ORDER

1. Remove a tip of steering draft (4), address appropriate section.

2. Open and remove collars (2) and (3) covers (1). Check a condition of collars, if necessary replace collars.
3. Remove a cover.
4. Check existence of corrosion and a side play in gear and rack transfer and the internal hinge. In the presence of corrosion the gear and rack mechanism needs to be replaced in a set. At the worn-out spherical hinge replace internal steering draft with the axial hinge (work HUNDRED).


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal.