Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   - Angles of installation of wheels of the car
      The angles of installation of wheels of the car - the general information
      Conditions of check of angles of installation of wheels
      Adjustment of forward wheels
      Adjustment of back wheels
      Check of clearance of a body of the car
   + Steering and safety cushions
+ Body
+ Onboard electric equipment


a45480c7





Adjustment of forward wheels

Ruler for measurement of a convergence of forward wheels

Beissbarth —  No. P860 000 883,
No. P 872
Matra — No. 002 548 199 074
Bosch —   No. 2 688 190 000,
   No. 1 688 190 022

Adjustment of disorder and longitudinal inclination of an axis of turn of forward wheels – is made by means of an eccentric bolt


Check and adjustment of a convergence of forward wheels


Adjustment of disorder is carried out by a forward eccentric bolt (19), and the longitudinal tilt angle of an axis of turn of a wheel is regulated by a back eccentric bolt (20) on the lower lever.

Check and adjustment of a convergence of forward wheels

 PERFORMANCE ORDER

1. Establish wheels in situation for the rectilinear movement by means of the device (055).
2. Check the central position of the steering mechanism and a steering wheel (arrow).
3. Establish a ruler (030) between internal surfaces of forward wheels. Check a convergence of forward wheels.
4. Adjustment of a convergence is carried out by rotation of steering drafts (10).
The convergence of forward wheels is given in Specifications.