Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
- Routine maintenance
   Specifications
   Indicator of term of approach of planned maintenance (ASSYST)
   Schedule of routine maintenance
   General information on control
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels. Rotation and replacement of wheels
   Replacement of motive oil and oil filter
   Checks of the brake system. Adjustment of the parking brake
   Check of fuel system
   Check of a state and replacement of hoses of a motive compartment, localization of leaks
   Check of a condition of ridge belts of the streaming drive of auxiliary units
   Check of functioning of the cooling system and frost resistance of cooling liquid. Liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil of automatic transmission
   Visual control of a box of gear shifting on oil leak
   Check of a state component of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Check of level of liquid of system of adjustment of clearance
   Check of the air conditioning system
   Cleaning of the mechanism of the movable panel of the hatch of a roof
   Visual control of a seat belt and block of a safety cushion
   Check of operability of headlights and horn
   Check of a state, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the battery of system of an emergency call of Tele-Aid
   Replacement of an element of the filter of air of salon / coal filter of purification of air
   Check, cleaning and lubricant of the coupling device
   Replacement of brake fluid
   Check of the elastic coupling of the driveshaft
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


a45480c7





Visual control of a seat belt and block of a safety cushion

 PERFORMANCE ORDER

1. Completely extend a seat belt and check a tape for availability of the damaged threads.

2. Damages can be a consequence, for example, of jamming of a belt or influence of the burning cigarette. In this case the belt should be replaced.
3. In the presence of mastications without signs of damage of threads it is not necessary to replace a belt.
4. The belt having the heavy course should be checked for twisting. If necessary it is necessary to remove facing on the central rack.
5. If the automatic machine of taking-up does not work, the belt needs to be replaced (work HUNDRED).
6. The tape of a belt can be cleared only soap and water. It is not necessary to apply for this purpose solvents or chemical cleaners at all.
7. Check installation sites of safety cushions for existence of damages.
8. You clean a surface of a steering wheel and panels under which knots of inflatable safety cushions are located the dry or moisturized with water rag.

 Attention! It is not allowed to paste over or fit any material a steering wheel and the surface of the forward panel on the right.