Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
- Operation manual
   Main bodies and panels of management/control
   Locks, keys and locks. Uniform lock
   Protection against theft
   Simplification of landing and disembarkation from the car
   Seats
   Systems of safety
   Steering wheel, rear-view mirrors
   Memory of provisions of seats, steering wheel and external mirrors
   Control panel
   Multipurpose steering wheel, universal display
   Switches
   Automatic heater and conditioner of air. Ventilation. Independent heater
   Heater of back glass
   Window regulators, roof hatch
   Equipment of salon
   Driving and auxiliary systems
   Precautionary alarm and control lamps, and also messages of the information display on the registered malfunctions
   First-aid kit, fire extinguisher, tool, sign of an emergency stop and compartment of a spare wheel. Sealing of punctures of tires
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


a45480c7





First-aid kit, fire extinguisher, tool, sign of an emergency stop and compartment of a spare wheel. Sealing of punctures of tires

First-aid kit

 

The first-aid kit is behind the left side facing in a luggage carrier.

Opening: Turn latches (2) and take side facing (1) aside.

 

Disconnect a fixing tape (3) and take out the first-aid kit (4).

Regularly check first-aid kit contents for completeness.

Fire extinguisher

 

The fire extinguisher is before the driver's seat.

After each use the fire extinguisher needs to be filled. It is necessary to make check of the fire extinguisher each 1-2 years.
Taking out of the fire extinguisher:

Pull the handle (1) up and take out the fire extinguisher (2).

Sign of an emergency stop

 

The sign of an emergency stop is in an additional compartment under a trunk floor.

Turn the right legs (2) to the right.

Turn the left legs (3) to the left.

 

Move apart legs (4).

 

Turn both side reflectors (5) up and connect with each other by means of the button.

Additional compartment under a trunk floor

 

1 Models with the spare folding tire.
Spare folding tire
2 Sign of an emergency stop
3 Fixing bolt of a spare wheel / cover of a set of the onboard tool
4 Office for a set of the onboard tool

Taking out of the spare folding tire

Take out a sign of an emergency stop with the holder.

Turn a fixing bolt to the left and take out the spare folding tire.

Take out a set of the onboard tool.

Take out a sign of an emergency stop with the holder.

Turn a fixing bolt to the left and if necessary take out the spare folding tire.

Set of the onboard tool

 

The set of the onboard tool is in an additional compartment under a trunk floor.

1 Models with sealing means of TIREFIT: sealing means of TIREFIT
2 Automobile jack
3 Compressor
4 Bolts of fastening of wheels for the spare folding tire
5 Antiretractable emphasis
6 Towing eyes
7 A centering pin for aluminum obodyev
8 A key for wheels

Means of TIREFIT for sealing of punctures of tires

Small punctures, in particular on a protector racetrack, can be pressurized by sealing means of TIREFIT.

Whenever possible do not delete the foreign objects which got stuck in the tire (for example, bolts or nails).

Sealing means of TIREFIT can be applied at a temperature of external air approximately to -20 °C.

Sealing of tires

Cock the parking brake.

Switch RKPP to the 1st transfer or transfer of a backing, automatic transmission - to situation "P".

Sealing means of TIRIFIT and the enclosed sticker with the inscription "max km/h" ("max. 80 km/h." take out from a luggage carrier.

Put a sticker on the control panel in sight of the driver.

 

Stir up a cylinder several times.

Screw a hose (1) on a cylinder.

The cylinder with sealing means of TIREFIT is open after that.

Unscrew a gate cap from the tire gate.

Unscrew a zolotnik of the gate the device for a vyvinchivaniye of gates. Not to put a gate zolotnik on sand or in dirt.

Remove a cap from a hose.

Get a hose on the tire gate.

Holding a cylinder a hose down, squeeze it.

Squeeze out all contents of a cylinder in the tire.

Remove a hose and screw in a zolotnik of the gate in the tire gate against the stop by means of the device for a vyvinchivaniye of gates.

The spare zolotnik of the gate is attached to the device for a vyvinchivaniye of gates.

Zakuporte hose cap.