Razzhimna the clip consists of actually clip and the plastic screw (1) or a pin (2). The plastic screw is rolled in an opening of a clip or the pin is pressed into a clip therefore pads of a clip are unclenched.
Many covers and facings from plastic fasten by means of razzhimny clips.
Removal
PERFORMANCE ORDER
1 Plastic screw: By means of the small screw-driver turn out the plastic screw a little and take out a clip for the screw from an opening. 2 Razzhimna pin: By means of the small screw-driver or nails take out a pin (2) from a clip a little.
Installation
PERFORMANCE ORDER
1. Plastic screw: Insert a clip with the turned-out plastic screw into an opening and screw the screw. 2. Razzhimna pin: Insert a clip with the extended pin into an opening and press a pin. 3. Now the clip is recorded.
