Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   + Leaving and external equipment of a body
   - Equipment of salon
      Remarks on work with the equipment of salon and a security measure
      Removal and installation of a razzhimny clip
      Removal and installation of a cover under the dashboard
      Removal and installation of the lower part of the dashboard
      Removal and installation of a ware box
      Removal and installation of a cover under a ware box
      Removal and installation of the central console
      Removal and installation of a cover of the top part of the central console
      Removal and installation of an internal mirror
      Removal and installation of facing in a cargo compartment
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of the shelf
      Removal and installation of facing of racks And yes In
      Removal and installation of facing are permanent C
+ Onboard electric equipment


a45480c7





Removal and installation of the shelf

Sedan

Removal

 PERFORMANCE ORDER

1. Release a seatback and cast away it forward.

2. Open a luggage carrier and disconnect a cable (1) from the lock of a back of a back seat.

3. Remove facing of a rack of C, address appropriate section.
4. Remove a side pillow of a back of a back seat as it is described in Section 57.

5. Take out by means of a plastic wedge the top fastenings (1) of a side pillow on the right and at the left. (6) – lock of a back of a back seat.

6. Take out the right and left clips (2).
7. Take out the right and left lock buttons (3) by means of a plastic wedge.
8. Take out from the car to a regiment (4).
9. Take out by means of a plastic wedge from the shelf 2 covers (5).


Installation

 PERFORMANCE ORDER

Installation is carried out in the sequence, the return to removal.