|
|
Mercedes C-ClassW203 since 2000 of releaseRepair and operation of the car |
|
|
Mercedes-Benz + Mercedes-Benz cars of class C (W-203) + Operation manual + Routine maintenance + Engine + Cooling system and heating + Power supply system and release + Engine electric equipment + Manual transmission + Automatic transmission + Coupling and power shafts + Brake system - Suspension bracket and steering Specifications + Suspension bracket of forward wheels + Suspension bracket of back wheels - Angles of installation of wheels of the car The angles of installation of wheels of the car - the general information Conditions of check of angles of installation of wheels Adjustment of forward wheels Adjustment of back wheels Check of clearance of a body of the car + Steering and safety cushions + Body + Onboard electric equipment 
|
Angles of installation of wheels of the car The angles of installation of wheels of the car - the general information The angles of installation of wheels considerably influence stability of the car, wear of tires and fuel consumption. Values of corners are given in Specifications.Disorder is an inclination of a wheel in the vertical plane of rather average line of the car. It can be positive if wheels are inclined outside or negative if wheels are inclined inside. The disorder corner, generally influences uniformity of wear of tires of forward wheels. If disorder of one wheel positive, and another negative, then takes away the car aside at the movement on a straight line. Convergence – side distance between wheels. The positive convergence means that wheels are in front located more closely to each other, than behind at measurement at height of an average point of a wheel. The negative convergence means that wheels in front are at bigger distance from each other, than behind. The cross inclination of an axis of turn of a wheel is a corner between the axis of an inclination of a rotary fist and a vertical which is carried out through a point of fastening of a wheel, looking in the longitudinal direction of the car. At the expense of corners of disorder and a cross inclination of an axis of turn of a point of a contact of wheels with the road settle down closer to an axis of a rotary fist. It supports a so-called "shoulder of a running in", driving is easier for those. Also blows from roughness of a covering are less transferred to steering. Longitudinal inclination of an axis of turn of a wheel. The axis concerning which there is a turn of a wheel is placed in space so that its lower part is directed forward. Such corner of a longitudinal inclination is called positive. At positive value of a corner self-return of a wheel to average situation after turn improves. |
|