Mercedes C-Class

W203 since 2000 of release

Repair and operation of the car



Mercedes-Benz
+ Mercedes-Benz cars of class C (W-203)
+ Operation manual
+ Routine maintenance
- Engine
   Check of a compression in engine cylinders
   Check of the engine by means of the vacuum gage
   Removal and installation of a cover of a motive compartment from the bottom
   + 4-cylinder petrol engines
   + 6-cylinder petrol engines
   - Diesel engines
      Removal and installation of the top cover of the engine
      Installation of the piston of the first cylinder in the provision of VMT
      Removal and installation of a cover of a head of cylinders
      Removal and installation of a head of cylinders
      Removal and installation of a forward cover
      Removal and installation of the top guide of a chain
      Replacement of chains of the GRM drive and installation of phases of gas distribution
      Removal and installation of camshafts
      Removal and installation of an intermediate asterisk
      Removal and installation of a natyazhitel of a chain
      Removal and installation of a maple belt
   + Engine lubrication system
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


a45480c7





Removal and installation of the top guide of a chain

Removal

 PERFORMANCE ORDER

1. Install the piston of the first cylinder in the provision of VMT, address the Section Installation of the Piston of the First Cylinder in the provision of VMT.
2. Remove the top cover of the engine, address appropriate section.
3. Remove a natyazhitel of a chain, address appropriate section.
4. Remove a forward cover, address appropriate section.
5. Fix the camshaft of inlet valves. For this purpose implant a lock finger through a cover of the first bearing of the camshaft into an opening in a camshaft asterisk.
6. Disconnect a lead of the camshaft of inlet valves. At the same time hold a shaft from a provorachivaniye a wrench.
7. Take out the top guide.


Installation

 PERFORMANCE ORDER

1. Establish the top guide.
2. Fix a lead on the camshaft of inlet valves by the moment of 50 Nanometers. At the same time hold a shaft from a provorachivaniye a wrench.
3. Take out a lock finger from an opening of a cover of the bearing of the camshaft and an asterisk of a shaft of inlet valves.
4. Establish a forward cover, address appropriate section.
5. Establish a natyazhitel of a chain with new laying, address appropriate section.
6. Establish the top covers of the engine, address appropriate section.